6.5.2 Replacing the Footrest (One-piece Footrest)
Allen key (4 mm) / Socket spanner (8 mm)
■□□
1.
Remove bolts, washers and nuts
A
on both sides.
2.
Pull the footrest out of the frame tubes.
3.
Insert new footrest.
4.
Insert bolts, washers and nuts
A
on both sides at the
same height in the required position and tighten.
A
= 4 Nm
6.5.3 Centring and adjusting the Angle (One-piece Footrest)
Allen key (4 mm) / Socket spanner (10 mm)
■□□
1.
Slightly Loosen bolts
A
and
B
.
2.
Adjust the distance from the side tube to the foot plate
to the same length on both sides.
3.
Incline the foot plate to the required position.
4.
Retighten bolts
A
(fixed side of the foot plate).
5.
Turn the little tube
C
on the moving side of the foot
plate such that it engages properly.
6.
Tighten bolts
B
.
A
= 10 Nm
B
= 10 Nm
6.5.4 Changing the Footrest Position (One-piece Footrest)
The foot plate can be mounted rear-set or front-set.
Allen key (4 mm) / Socket spanner (10)
■□□
1.
Remove bolts
A
.
2.
Turn the foot plate with the clamp component.
3.
Reinsert bolts
A
and tighten.
A
= 10 Nm
1659353-A
31
Summary of Contents for Compact FF
Page 55: ...Notes ...