Küschall® Champion
6.6.3 Installing/adjusting the siderest
Allen key (3 mm, 4 mm) / Wrench (10 mm) / Phillips screw driver
■■□
1.
Install the bracket
B
with the sleeves
C
to the seat
module using bolts and nuts
A
.
2.
Slightly loosen the grub screw
D
on the adjustment
plate
E
and adjust the armrest to the desired height.
3.
Retighten the grub screw.
4.
By tightening or loosening the screws
F
, you can adjust
how easily the armrest can be pulled out or pushed in.
A 3° wheel camber requires that an additional set
of distance plates has to be installed between the
adapter plate and the side profile.
A
= 13 Nm
D
= 4 Nm (high-strength)
6.6.4 Installing the tubular armrest
Allen key (4 mm) / Wrench (10 mm)
■■□
1.
Mount the armrest holder
A
with screws
G
and
H
,
washers and cap nuts on the side supporter
I
.
2.
Place the armrest clamp part sleeve
D
to the third hole
from above inside the armrest tube
B
.
3.
Insert bolt
C
in smaller hole of the armrest tube and
armrest clamp part sleeve.
4.
Secure the cylinder head bolt with sleeve
E
and
securing cap nut
F
.
If the folding mechanism affects the armrest
tube when folding the wheelchair, sleeve
D
must be displaced downwards.
5.
Mount the tube plugs and the armrest pad.
6.
Place the armrest in the holder.
F
= 7 Nm (high-strength)
G
= 13 Nm
H
= 13 Nm
32
1659360-B
Summary of Contents for CHAMPION
Page 11: ...Instructions 6 Instructions 1659360 B 11 ...
Page 42: ...Notes ...
Page 43: ...Notes ...
