manualshive.com logo in svg

Kurzweil SP6, Musician'S Manual

Share
Download
Kurzweil SP6 Musician'S Manual Download Page 31

Program Mode

SPLIT/LAYER

2-7

SPLIT/LAYER

Press the PREVIOUS and NEXT buttons simultaneously to access the Split/Layer function. 

The Split and Layer functions have identical parameters, but produce different results. 
The Split function allows you to quickly create a Multi such that keys in one range of the 

keyboard produce different sounds than another range. 
The Layer function allows you to layer Programs and Multis such that more than one 

instrument sound can be produced by playing one key.
The Split and Layer functions allow you to quickly create Multis without using Multi Edit 

Mode to configure Zone key ranges, Programs, and volumes. After creating and saving a Split 

or Layer Multi, you can edit additional Multi parameters in Multi Edit mode.

SPLIT

When you create a Split in Program Mode, you are creating a Multi with two Zones set to 

On. 
The Program you were using in Program Mode is used in the right hand of the Split as the 

Zone 1 Program. You can choose a Program that will be used in the left hand of the Split as 

the Zone 2 Program.
Follow these steps to create a Split:

1.  In Program Mode, select a Program for the right hand of the Split.
2.  Press the PREVIOUS and NEXT buttons simultaneously to access the “Split or Layer” 

Page.

Summary of Contents for SP6


































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands