9
➌
Side Panel(Right) Stand
➋
Side Panel(Left) Stand
➍
Pedal Box
➐
Pedal Box Set Bolt
➎
Back Panel
Pedal Cable
➒
Back Panel
Set Screw
➑
Back Panel
Set Bolt
➓
Cable Clamps
1) Put the cable in the Pedal Box
❹
out.
2) Starting with the left stand leg
❷
, align the holes
in the Pedal Box
❹
with the holes in the left stand
leg
❷
, then thread the Pedal Box Set Bolts
➐
into
the holes.
3) Repeat with the right stand
❸
and tighten all bolts
fully.
1) Place the Back Panel
❺
on the assembled stand
legs. Align the holes in the Back Panel
❺
with the
bracket in the stand legs, then fasten them by
using the Back Panel Set Bolts
➑
as shown.
2) Attach the Pedal Box
❹
to the bottom of the Back
Panel
❺
and thread the Back Panel Set Screws
➒
into the 4 holes.
3) After placing the Cable Clamps
➓
over the pedal
cable, stick it on the back panel, then arrange the
cable behind the Back Panel
❺
.
Assembling Left/Right Side Panel Stand
Assembling Back Panel
Caution
Please arrange the pedal cable after completely assembling the back panel with the side
panel and pedal box.
Summary of Contents for M110
Page 1: ...1 USERʼS MANUAL M110 ...
Page 6: ...4 ...
Page 27: ...25 MIDI Implementation Chart Chapter 13 88 88 87 87 ...
Page 31: ...NOTE ...