Kurzweil HUB7, Manual, Page: 32 / 56

Using the RSP8
1-26
Quick mode also enable you to change EQ/Sends parameters
with the control knobs. The page displaying the parameter(s) you
wish to control must be the current (i.e., visible) page on the
screen.
Use the RSP8 knobs to control the items on the screen, as shown
in the illustration below. Note that the top knob in each column
controls the selection in the box. The bottom three knobs in each
column control any parameters listed below the box.
Figure 1-4. Using Control Knobs on an EQ/Sends page.
Studio:MIXSEND||||||||||||||||(Studio)
||||||||||||||||||||||||||||
||||||||e1111111111t|||errrrrrrrt ||||||
FX5-6--- k Mix1-2|Bal g -o| k None|||| g -o h|||
||||||| |CVVVVVVVVVVB|||CVVVVVVVVB ||||||
|||||||||Bal||:0%|||||||||||||||||||||||
|||||| | ||Widt h :100%|| ||||||
|||||||||Gain|:0.0dB||||||||||||||||||
IN|EQ| | FXSEND | MIXSEND ||||||||||||||||||