Kurzweil HUB7, Manual, Page: 31 / 56

Using the Control Knobs
1-25
Changing Quick Parameters with Control Knobs
In Auto or Quick mode, you can use the RSP8’s control knobs to
control the eight parameters on the currently displayed QUICK
page. All you need to do is make a Studio:QUICK or
Chain:QUICK page the currently displayed page. Quick pages
have up to eight parameters per page, and the value of each
parameter on the page can be controlled with the corresponding
knob on the RSP8. For example, you can change the value of the
second parameter in the left column by moving the second knob
in the left column of control knobs.
The illustration below shows control knob 1 being used to change
the value of the
fi rst parameter (Wet/Dry) on a Studio:QUICK
page.
Figure 1-3. Using Control Knobs on a QUICK page.
Studio:QUICK|176|Dub|Skanque|Dly||2/2U||
||||| |errrt |||||||||||||||||||||||||||||
FX1-2| k Dly g ---------------------------- h
Wet/Dry VVVB : 5O%wet| Tempo|||||:120BPM||||
Fdbk|Level|:51%||||HF|Damping:5588Hz||||
LF|Damping|:262Hz||Tap2|PtAmt:75%|||||||
Tap3| P tAmt|: 5 O%|||| T ap4|Pt A mt:5O% | ||||||
<more | MASTER | STUDIO | FXBUS| | QUICK| | |more>