Kurzweil HUB7, Manual, Page: 16 / 56

Using the RSP8
1-10
The Remote:JOYSTIK Page
The parameters for the joystick are all displayed on the Remote:
JOYSTIK page. You can reach this page by either pressing the
JOYSTIK soft button on any Remote Con fi guration Menu, or by
pressing and holding the joystick button on the RSP8. Note that
being on this page doesn’t make the joystick active; you still have
to press the
joystick button on the RSP8 to do that.
•
Bank - 1–8
For your convenience, you can con fi gure and store up to
eight banks of joystick settings. These are separate from the
eight knob banks that you can also create.
•
Mode - Auto, MIDI, or Pan
Speci fi es whether the RSP8’s joystick sends panning
information, MIDI data, or either (Auto) depending on the
currently displayed page. Auto is the default.
Although this item appears on the Remote:SETUP and
Remote:JOYSTIK pages, it cannot be set separately for
individual joystick banks. When you change the setting of
Joy Mode on any of the pages where it is displayed, the
setting is changed globally.
•
Axis - X, Y, Rad, Angle (display fi eld only)
These are the labels for the four columns showing the values
that the joystick sends: X and Y axis position values, as well
as the numeric values for Radius and Angle. Generally a
panner will use two of these axes together: X and Y, or Radius
and Angle, depending on the panner. All four are available at
all times, however, so you can use any or all of them as
controllers when you use the joystick to send MIDI.
Remote:JOYSTIK||||||||||||||||||||||||||
Bank||: 1 ||||||||||||||||||||||||||||||||
Mode||: Auto
Axis|||X|||Y|||Rad|Angle|
Chan||:Cur|Cur|Cur|Cur||||
Ctrl||:25||26||27||28|||||
Value| | 0|||0| | |0|||0 | ||||||| ||||||| |||||
SELECT | SETUP| | KNOBS| | JOYSTIK ||||||| Done|