Kurzweil HUB7, Manual, Page: 14 / 56

Using the RSP8
1-8
Menu Items on the Remote:SETUP Page
The Remote:SETUP page includes the following:
•
Knob Mode – Quick, MIDI, Auto
Speci fi es whether the eight control knobs on the RSP8 control
the values of Quick and EQ/Sends parameters (Quick), send
MIDI data (MIDI), or do either (Auto) depending on the
currently displayed page. Auto is the default. Although this
item appears on the Remote:SETUP and Remote:KNOBS
pages, it cannot be set separately for individual knob banks.
When you change the setting of Knob Mode on any of the
pages where it is displayed, the setting is changed globally.
•
Joy Mode – Pan, MIDI, Auto
Speci fi es whether the RSP8’s joystick sends panning
information (Pan), MIDI data (MIDI), or either (Auto)
depending on the currently displayed page. Auto is the
default. Although this item appears on the Remote:SETUP
and Remote:JOYSTIK pages, it cannot be set separately for
individual joystick banks. When you change the setting of
Joy Mode on any of the pages where it is displayed, the
setting is changed globally.
•
3-way Mode – Front-back, All axis
Sets the way that the joystick works when you use the “FX1-6
3-Way” mono-to-5.1 panner on the FXSEND page.
Front-
back keeps the front-back axis fi xed, while All axis allows
you to move the front back axis as well as the sound source
position.
•
Backlight – 1-127
Controls the RSP8 display intensity. See “Adjusting the RSP8
Display” on page 1-6.
•
MIDI Xmit – Local, MIDI, Both
You can send MIDI data from the RSP8 only to the attached
KSP8 (Local), to the KSP8’s MIDI Out port (MIDI), or Both.