Kurzweil HUB7, Manual, Page: 13 / 56

Remote Configuration Menus
1-7
Remote Configuration Menus
Most RSP8 features work automatically when you connect it to a
KSP8. Some of the specialized functions, however, may require
some con
fi guration before you can use them.
To access the Remote Con fi guration Menus (either from the front
panel of the KSP8, or from the RSP8 itself), press the MASTER
soft button, then UTIL followed by REMOTE . Or, you can
double press the rightmost two soft buttons beneath your KSP8
or RSP8’s display for a shortcut to this page.
Soft Buttons on the Remote Configuration Menus
You’ll use SELECT when you have several KSP8s connected to
the RSP8 through a HUB7. This soft button lets you choose the
current KSP8 for RSP8 control.
SETUP , KNOBS , and JOYSTIK take you to the Remote pages of
the same names. They’re discussed in detail a little further on.
Press Done when you are ready to leave the Remote
Con fi guration Menus.
Remote:SETUP||||||||||||||||||||||||||||
||||||||||||||||||||||||||||
Knob|Mode||:
Auto| ||||||||||||||||||||
Joy|Mode|||:Auto||||||||||||||||||
3-way|Mode|:All|axis|||||||||||||||||||||
Backlight||:127|||||||||||||||||||||||
MIDI|X
m
it||:L
o
cal|||
|
|||||||
|||||||
|||||
SELECT | SETUP| | KNOBS| | JOYSTIK ||||||| Done|