manualshive.com logo in svg

Kurzweil Forte 7, Musician'S Manual

Introducing the Kurzweil Forte 7, a powerhouse for musicians seeking an exceptional performance instrument. Unlock its full potential with the comprehensive Musician's Manual, available for free download at manualshive.com. This invaluable resource equips you with the knowledge to maximize your creativity and harness the true capabilities of the Forte 7.

Share
Download
background image

Program Mode

Selecting Programs

6-2

Selecting Programs

When you are in Program Mode, there are a few ways to select Programs.

•  To select a Program in the current Category, use the Alpha Wheel or the Next and 

Previous buttons.

•  To select a Program in a different Category, press the Category button of choice and 

then use the Alpha Wheel or the Next and Previous buttons.

•  To select the default Program from a Category, simply press the relevant Category 

Button.

•  To browse saved user Programs, press the User button, then use the Alpha Wheel 

or the Next and Previous buttons. Press the User button again to stop viewing only 

user Programs, or press a Category button or use keypad mode to enter a factory ID 

number.

•  The Alpha Wheel and the Next and Previous buttons allow you to advance through 

the Programs one at a time. When you reach the end of the Category, advancing 

further will go the the next Category.

•  If a Program is assigned to a Favorite Button, pressing that button will go directly to 

the assigned Program.

•  To select a Program by ID number, press the Keypad Button so that its LED lights. 

Use the numbers on the Category buttons to enter an ID number, then press the 

Enter button. In Keypad mode the list of Programs is sorted by ID number only, 

instead of by Category and ID. Using the Alpha Wheel or Previous/ Next buttons 

will select the previous or next used Program ID, regardless of category. Press the 

Keypad Button again to return to Category selection.

Summary of Contents for Forte 7





















































































































































































































































Reviews:

No comments

Related manuals for Forte 7

Unitech K2714 Setup Manual preview
K2714
Brand: Unitech Pages: 3
Steelmate PTS800V7 User Manual preview
PTS800V7
Brand: Steelmate Pages: 14
BTC 5309URF Quick Install Manual preview
5309URF
Brand: BTC Pages: 1
Pioneer ND-BT1 Owner'S Manual preview
ND-BT1
Brand: Pioneer Pages: 5
Pioneer Comfort adapter CA-D-PI.150 Quick Start Manual preview
Comfort adapter CA-D-PI.150
Brand: Pioneer Pages: 2
Pioneer ND-BC20PA Owner'S Manual preview
ND-BC20PA
Brand: Pioneer Pages: 6
Pioneer ND-BT1 Service Manual preview
ND-BT1
Brand: Pioneer Pages: 27
Razer BlackWidow Tournament Edition Chroma V2 Master Manual preview
BlackWidow Tournament Edition Chroma V2
Brand: Razer Pages: 41
Yamaha GS1 Reference Manual preview
GS1
Brand: Yamaha Pages: 4
Yamaha HandySound HS-501 Owner'S Manual preview
HandySound HS-501
Brand: Yamaha Pages: 12
Yamaha HA-1 User Manual preview
HA-1
Brand: Yamaha Pages: 12
Yamaha EZ-EG Supplementary Manual preview
EZ-EG
Brand: Yamaha Pages: 3
Yamaha Electric Keyboard MOTIF XS6/7/8 Software Manual preview
Electric Keyboard MOTIF XS6/7/8
Brand: Yamaha Pages: 7
Yamaha GS1 Operating Manual preview
GS1
Brand: Yamaha Pages: 20
Yamaha H01 Owner'S Manual preview
H01
Brand: Yamaha Pages: 30
Yamaha EZ-EG Service Manual preview
EZ-EG
Brand: Yamaha Pages: 33
Yamaha EX7 Data List preview
EX7
Brand: Yamaha Pages: 55
Yamaha H11 Owner'S Manual preview
H11
Brand: Yamaha Pages: 66

Brands by name

Popular brands

Load more brands