manualshive.com logo in svg

Kurzweil Forte 7, Musician'S Manual

Introducing the Kurzweil Forte 7, a powerhouse for musicians seeking an exceptional performance instrument. Unlock its full potential with the comprehensive Musician's Manual, available for free download at manualshive.com. This invaluable resource equips you with the knowledge to maximize your creativity and harness the true capabilities of the Forte 7.

Share
Download
background image

Features of the Forte and Forte7

 

3-11

Mode Buttons

The Mode buttons are located beneath the “Mode” label on the right side of the Forte front 

panel. 

Program Button

Pressing the Program button enters Program Mode (described in Program Mode on page 

page 5-1 and, in further detail, in Program Mode on page page 6-1). In Program Mode, 

you can select and play different sounds (or “Programs”). This button’s LED is illuminated 

when you are in Program Mode. Program Mode is the default Mode  — the Forte always 

boots up in this Mode.

Multi Button

Pressing the Multi button enters Multi Mode (described in Multi Mode on page page 5-2 

and, in further detail, in Multi Mode on page 8-1). In Multi Mode, you can select different 

configurations of Programs, controller assignments, and MIDI channel assignments. 
This button’s LED is illuminated when you are in Multi Mode.

Global Button

Pressing the Global button enters Global Mode (described in Global Mode on page 5-2 

and, in further detail, in Global Mode on page 10-1). In Global Mode, you can edit 

parameters that control the overall behavior of the Forte. These parameters include tuning, 

transposition and velocity as well as being able to reset the Forte back to a factory state.
 This button’s LED is illuminated when you are in Global Mode.

CAUTION: Performing a Reset will erase ALL User Program and User 

Multis, and will reset Global settings to a  factory state.

Summary of Contents for Forte 7





















































































































































































































































Reviews:

No comments

Related manuals for Forte 7

Tascam FireOne Owner'S Manual preview
FireOne
Brand: Tascam Pages: 24
ECS FIA-030-B Fitting Instructions preview
FIA-030-B
Brand: ECS Pages: 4
Technics SX-KN7000EB Service Manual preview
SX-KN7000EB
Brand: Technics Pages: 160
M-Audio Keystation 61 User Manual preview
Keystation 61
Brand: M-Audio Pages: 44
Ploom TECH+ P+1 User Manual preview
P+1
Brand: Ploom TECH+ Pages: 48
Discount Car Stereo A2DIY-CHRY Installation Manual preview
A2DIY-CHRY
Brand: Discount Car Stereo Pages: 5
WAGNER Evobell 3500 Translation Of The Original Operating Manual preview
Evobell 3500
Brand: WAGNER Pages: 88
Active Key MedicalKey AK-C4110 User Manual preview
MedicalKey AK-C4110
Brand: Active Key Pages: 2
Active Key MedicalKey AK-C8100 User Manual preview
MedicalKey AK-C8100
Brand: Active Key Pages: 2
Active Key AK-C7000 User Manual preview
AK-C7000
Brand: Active Key Pages: 2
Active Key AK-C7000F-F Instructions preview
AK-C7000F-F
Brand: Active Key Pages: 2
Active Key AK-C4110F-F Instructions preview
AK-C4110F-F
Brand: Active Key Pages: 2
Philips SPK3700BC/97 User Manual preview
SPK3700BC/97
Brand: Philips Pages: 2
Philips SPK3700BC/61 User Manual preview
SPK3700BC/61
Brand: Philips Pages: 2
Philips SPK1700BC/97 User Manual preview
SPK1700BC/97
Brand: Philips Pages: 2
Philips SPK1000SC/93 User Manual preview
SPK1000SC/93
Brand: Philips Pages: 2
Philips SPK1700BC/61 User Manual preview
SPK1700BC/61
Brand: Philips Pages: 2
Philips LTC 2601/00 Installation Instructions preview
LTC 2601/00
Brand: Philips Pages: 2

Brands by name

Popular brands

Load more brands