Kurzweil Forte 7, Musician'S Manual

Page: 146 / 244

Multi Edit Mode
CONTROLS Page
9-26
Controller
Number
Controller
Destination
Description
120 Sound Off Stops all sound in the corresponding channel.
121 RstCtls Resets Controllers to defaults in the corresponding channel.
122 Local
123 Notes Off Sends Note Off Message to all playing notes in the corresponding channel.
124 Poly
125 Omni
126 Mono On
127 Mono Off
128 Pitch Values above 64 and below 64 bend the pitch up and down, respectively.
129 PitchRev Values above 64 and below 64 bend the pitch down and up, respectively
130 PitchUp Values above 0 bend the pitch up
131 PitchDwn Values above 0 bend the pitch down
132 Pressure Default Destination for Pressure
133 Tempo Tempo
134 KeyNum
Triggers playback of notes by Key Number—e.g., C4 is 60. Send a velocity first with
Destination135, KeyVel.
135 KeyVel Key Velocity
136 ProgInc Program Increment—increments current Program number.
137 ProgDec Program Decrement—decrements current Program number.
138 ProgGoto Go to Program—selects Program.
139 MultiInc Multi Increment—increments current Multi number.
140 MultiDec Multi Decrement—decrements current Multi number.
141 SetpGoto Go to Multi—selects Multi.
145 TransUp Transpose Up (ST)
146 TransDown Transpose Down (ST)
149 MuteZn
Mute Zone – Values above 64 will mute the zone that sends values to this destina-
tion, values below or equal to 64 will unmute the zone.
161 Panic
Sends an “all notes off” message and an “reset all controllers” message on all 16
MIDI channels.
162 SoloZn
Solo Zone - Values above 64 will solo the zone that sends values to this destina-
tion, values below or equal to 64 will unsolo the zone. When a zone is soloed, the
Zone Mute button LED for the soloed Zone will turn red. All other Zones will be
muted and their Zone Mute button LEDs will turn orange. Pressing any muted/or-
ange Zone buttons will make that Zone the soloed zone. Pressing the soloed zone
button will cancel solo mode. To return to Solo mode the original controller assigned
to Solo Zone (162) will need to be re-engaged.
180 Chan Intonation
Selects the Intonation Map (IDs 0-127) in a MIDI channel in real time. On the Multi
Edit CONTROLS page, when setting a switch controller to this Destination the
name of the selected Intonation Map will be displayed. For example: 18 (EastMed).
181 Chan Int Key
Selects the Intonation Key (C through B) in a MIDI channel in real time. On the
Multi Edit CONTROLS page, when setting a switch controller to this Destination the
MIDI number and note name of the selected Intonation Key will be displayed. For
example: 41 (D#).