Multi Edit Mode
CONTROLS Page
9-16
CONTROLS Page
Press the CONTROLS soft button to view pages where you can set parameters for each of
the Forte physical controllers. Broadly speaking the Forte has switch controllers (such as
buttons and Foot Switches), and continuous controllers (such as the wheels, sliders and foot
controllers). Switch and continuous controllers have different parameters available to them
on the Controls page, which are described below.
Switch Controllers
Parameter
Range Of Values
Controller
See Controller List
Mode
Off, MIDI CC, Chord (Chord is only
available for Switch Controllers)
Type
Momentary, Toggled
Destination
See Multi Destination Control List
OnValue
None, 0 to 127
OffValue
None, 0 to 127
Entry State
None, Off, On
Exit State
None, Off, On
Velocity
Auto, 1 to 127
Key1....Key8
None, C-1 to G9
You can select any of the Forte’s physical controllers by moving the cursor to the “Controller”
parameter, and using either the Alpha Wheel or Value buttons to scroll the list. Alternatively,
you can also position the cursor in the “Controller” parameter, hold down the Enter button
and move the controller you wish to edit.