manualshive.com logo in svg

Kurzweil Forte 7, Musician'S Manual

Introducing the Kurzweil Forte 7, a powerhouse for musicians seeking an exceptional performance instrument. Unlock its full potential with the comprehensive Musician's Manual, available for free download at manualshive.com. This invaluable resource equips you with the knowledge to maximize your creativity and harness the true capabilities of the Forte 7.

Share
Download
background image

Multi Edit Mode

MAIN Page

9-13

EntryPrgChg

The Entry Program Change parameter determines whether or not the currently selected 

Zone will send a MIDI Program change message when the Multi is loaded. You can set this 

parameter to either Off or On. When set to On, the Zone will send a MIDI Program change 

message with the Program specified for the MIDI Program parameter.

Bend Up / Down ST &  Bend Up / Down CT

Bend Up ST and Bend Down ST sends a bend range message to an internal program or 

a MIDI device, telling it how to define subsequent pitch bend messages. You can set this 

parameter to any value between 0 semitones and 127 semitones, or to Prog, which uses the 

Bend Range Up / Down of the currently selected Program for the Zone. The value can be 

entered numerically, and entering -1 will select Prog. (value that the Program would use in 

Program Mode).
Bend Up CT and Bend Down CT lets you fine tune the value for Bend Up ST & Bend 

Down ST (semitones). 100 cents equals one semitone, or one half step; you can set this 

parameter anywhere between 0 and 100 cents.

VelMode

The Velocity Mode parameter determines the method that the Forte maps the keyboard’s 

strike velocity to MIDI velocity. Set to “Traditional” the keyboards velocity will translate to a 

MIDI velocity depending how hard you strike it. With a setting of “Fixed”, the velocity is set 

to a pre-determined value regardless of how hard or soft the keyboard is played.
A setting of “Fixed” will remove some of the other Velocity settings in the MAIN page and 

replace it with a parameter called Velocity that has range of values from 0 to 127.

VelScale

The Velocity Scale parameter lets you amplify or diminish velocity response from -300% 

to 300%. Normal response is 100%. Higher values make the keyboard more sensitive (you 

don’t need to play as hard to get higher MIDI velocities) while lower values make it less 

sensitive (playing harder doesn’t change MIDI velocity as much). You can also set the scale to 

a negative number, in which case the velocity response is turned upside-down: playing harder 

produces a softer sound and vice versa. This is useful for creating velocity-based crossfades 

between zones. 
See the following section on VelOffset for ideas about negative scaling.

VelOffset

The Velocity Offset parameter also changes the velocity response, but in a more direct way, by 

adding or subtracting a constant to the key velocity. 

Summary of Contents for Forte 7





















































































































































































































































Reviews:

No comments

Related manuals for Forte 7

Azio KB335 User Manual preview
KB335
Brand: Azio Pages: 5
SMK-Link VP3810-TAA User Manual preview
VP3810-TAA
Brand: SMK-Link Pages: 1
GETT CLEANDESK Quick Start Manual preview
CLEANDESK
Brand: GETT Pages: 2
Parkmate RVM-043DVR User Manual preview
RVM-043DVR
Brand: Parkmate Pages: 16
Infinite Response VAX77 User Manual preview
VAX77
Brand: Infinite Response Pages: 96
AVYCON AVK-N1100 Quick Start Manual preview
AVK-N1100
Brand: AVYCON Pages: 28
Toshiba 50L7300U User Manual preview
50L7300U
Brand: Toshiba Pages: 186
Toshiba 58L7350U User Manual preview
58L7350U
Brand: Toshiba Pages: 198
Yamaha Tyros3 Software Installation Manual preview
Tyros3
Brand: Yamaha Pages: 16
Yamaha S70 XS Brochure & Specs preview
S70 XS
Brand: Yamaha Pages: 6
Yamaha S70 XS Installation Manual preview
S70 XS
Brand: Yamaha Pages: 6
Yamaha Reface DX Reference Manual preview
Reface DX
Brand: Yamaha Pages: 11
Yamaha SK-15 Operating Manual preview
SK-15
Brand: Yamaha Pages: 16
Yamaha SK-50D Owner'S Manual preview
SK-50D
Brand: Yamaha Pages: 28
Yamaha Remie PSS-E30 Owner'S Manual preview
Remie PSS-E30
Brand: Yamaha Pages: 22
Yamaha SHS-10 Owner'S Manual preview
SHS-10
Brand: Yamaha Pages: 40
Yamaha Stagepas 300 Service Manual preview
Stagepas 300
Brand: Yamaha Pages: 54
Yamaha PSRE413 - KEYBOARD USB 100 PATTERNS Service Manual preview
PSRE413 - KEYBOARD USB 100 PATTERNS
Brand: Yamaha Pages: 58

Brands by name

Popular brands

Load more brands