Kurzweil Flash Play PC4 Musician'S Manual Download Page 271

Page: 271 / 335

Song Mode

The FX Page

8-22

The FX Page

The Song mode FX page works the same way as the FX page in Multi Edit mode, with the

following exception: Song Mode does not have an AuxFX Ch parameter. Instead, in Song

Mode the Aux 1 and 2 Chains are determined by the “FX Track” parameter on the Song

Mode MAIN page (see

“FX Track” on page 8-12

for details). The program in the selected FX

Track determines the Aux Chains of the current song (unless an override chain is selected).

See

“FX Page” on page 7-27

for details.

Summary of Contents for Flash Play PC4
















































































































































































































































































































































Search results

Summary of Contents for Flash Play PC4

Reviews:

Related manuals for Flash Play PC4

Brands by name

Popular brands

Kurzweil Flash Play PC4, Musician'S Manual

Search results

Summary of Contents for Flash Play PC4

Reviews:

Related manuals for Flash Play PC4

Brands by name

Popular brands