DMTi
4
AES/EBU inputs
AES/EBU outputs
KDS (K2500)
input output
(& return)
Word
Clock
input output
S/PDIF
optical
input
S/PDIF optical
output
DMTi rear panel
Inputs
AES1
and
AES2
. These two AES/EBU inputs each accept a stereo signal.
These are the “professional” type of AES/EBU connectors, as described by
the AES Type 3 specification, which use XLR connectors. These inputs can
also accept “consumer” type AES/EBU or Sony/Philips Digital Interface
Format (S/PDIF) signals, but external adapters must be used. These
adapters are described on Page 10.
The
AES1
input can alternatively be accessed with an optical connector, for
S/PDIF signals in that format. A switch on the rear panel determines which
AES1
input will be active.
KDS In
. This is an input for the eight-channel digital output bus (known as the
“Kurzweil Digital Stream”) from a Kurzweil 2500-series instrument which
is equipped with a KDS digital input/output or KDFX digital effects
option. It uses a 15-pin connector and a 3-meter custom cable, included
with the
DMTi
. (A 15-meter version of the cable is available from Kurzweil
dealers.) The sampling rate of the KDS bus is 48 kHz.
The
KDS In
also includes a two-channel output to the K2500, called the
“Return”, which allows signals being processed through the
DMTi
to be
sampled by the K2500, if the K2500 is equipped with the Sampling option.
(To use this feature, set the following parameters on the K2500’s Sample
Page: Input to “Digital” and Src to “Rtn”.)
AC power
ADAT In
ADAT Out
ADAT interface option
sync
optical (audio)
TDIF-1 In/Out
DA-88 (TDIF-1) interface option
Optical In
Select
Input
In 1
AES
AES In 2
Out 1
Optical Out
AES
AES
Out 2
AES
Out 3
Out 4
AES
Word Clock In
In
Out
KDS
KDS
Word Clock Out