Kurzweil DMT interface, User Manual, Page: 29 / 44

29 User’s Guide
Settings
• Set the Destination knobs for all of the pairs that you are using to either one
of the AES inputs or one of the KDS pairs, as appropriate.
• Set
Clock Select
to one of the
Int
settings or
WDCLK
, as appropriate.
• Variation: Multimedia sources to Pro Tools
Setting up multiple sources for simultaneous recording into Pro Tools is simi-
lar to setting them up for digital mixing: the Pro Tools system must have one
and only one sync reference, which can come from the
DMTi
’s internal clock,
from one of the sources, or from an external word clock signal which is con-
nected both to the
DMTi and the Pro Tools interface.
Normally, Pro Tools must be set up to accept external digital sync from the
DMTi
—this is done in software—or else it will try to convert incoming signals
“on the fly”, and this can create errors. If for some reason Pro Tools must be the
master clock, the solution is simple: run a BNC-to-BNC cable from Pro Tools’
word clock output to the
DMTi
’s Word Clock In put, and set Clock Select to
WDCLK .
(Clock:
from external
video or word
clock, if used)
KDS
In
AES2
In
AES1
In
Computer
with sound
card
CD
player
AES
Outs
Pro Tools
hard-disk
audio
system
Pro Tools
interface
word
clock
in or out,
if used
rack interface
interface
AES 2, MDM 3-4, KDS B
A
AES 1, MDM 1-2, KDS A, KDS Rtn
ower P
7-8
KDS MDM
A
KDS
D
AES 1
C
B
outing R
1-2
3-4
AES 2
5-6
Source
D
C
B
AES 1
KDS
MDM
AES 4, MDM 7-8, KDS D AES 3, MDM 5-6, KDS C
MDM
7-8 A
KDS
7-8
MDM KDS
A 7-8
Source
1-2
3-4
5-6
Source
AES 2
D
C
B
AES 1
1-2
3-4
5-6
AES 2
D
C
B
AES 1
Source utput Sync Clock Select
1-2
3-4
5-6
AES 2
O
AES 2
MDM
AES 1
Int 44.1K
Int 48K
WDCLK
M
D
T ulti -
igital
DMT
Output Format
Pro Cnsmr Pro Cnsmr
Output Format
Destination 1 Destination 1 Destination 2 Destination 3 Destination 4 Destination 2-4