Kurzweil DMT interface, User Manual, Page: 27 / 44

27 User’s Guide
Settings
• Set the Destination knobs for all of the pairs that you are using to either one
of the AES inputs or one of the KDS pairs, as appropriate.
• For your initial tracks, it is often easiest to use the MDM as the sync master:
set Clock Select to MDM . If you want to use one of the other sources as the
sync master, you can, or you can use one of the Int settings or WDCLK . If
you are using anything other than the MDM as the master, however, you
must make sure the modular digital multitrack deck is set to sync to an
external clock signal. (Multiple ADAT users see the “Special Note” on Page 23.)
When overdubbing to the MDM…
Modular Digital Multitrack decks cannot use different clock sources for
recording and playback at the same time. Therefore, if you are recording tracks
to a multitrack digital tape that already has one or more tracks recorded on it,
then the MDM must be the sync master: set
Clock Select to MDM . There is an
exception to this rule: if you are using an external clock source, then both the
DMTi
and the MDM must be set up to slave to that source.
(Clock:
from external
video or word
clock, if used)
MDM
KDS
In
01:23:45:2
9
AES2
In
AES1
In
Computer
with sound
card
CD
player
rack interface
interface
AES 2, MDM 3-4, KDS B
A
AES 1, MDM 1-2, KDS A, KDS Rtn
ower P
7-8
KDS MDM
A
KDS
D
AES 1
C
B
outing R
1-2
3-4
AES 2
5-6
Source
D
C
B
AES 1
KDS
MDM
AES 4, MDM 7-8, KDS D AES 3, MDM 5-6, KDS C
MDM
7-8 A
KDS
7-8
MDM KDS
A 7-8
Source
1-2
3-4
5-6
Source
AES 2
D
C
B
AES 1
1-2
3-4
5-6
AES 2
D
C
B
AES 1
Source utput Sync Clock Select
1-2
3-4
5-6
AES 2
O
AES 2
MDM
AES 1
Int 44.1K
Int 48K
WDCLK
M
D
T ulti -
igital
DMT
Output Format
Pro Cnsmr Pro Cnsmr
Output Format
Destination 1 Destination 1 Destination 2 Destination 3 Destination 4 Destination 2-4