Kurz 410FTB, Operation Manual

Page: 102 / 165

Kurz B ‐ Series Operations Guide 4–29
Program Mode Advanced Setup
Option 13 — Calibration Data
The flow meter is manufactured based on the order specifications. Changing the calibration
information can affect the accuracy and reliability of the flow meter.
Important
Calibration should only be changed by Kurz Field Service or under
authorization from Kurz. There is no “undo” capability once a
change is entered and another prompt appears.
To access the Calibration Data menu in Program mode:
1>
Press P .
2>
Enter the Advanced access code, and then press E .
3>
Press 2 to invoke the Quick Jump option.
4>
Press 13 for the Calibration Data menu, and then press E .
SENSOR SN
FD9079A
A prompt appears showing the sensor serial number. This is read only.
5>
Press E .
CAL FLOW UNIT
>SMPS ^v
The Calibration Flow Unit prompt appears.
Important
Changing the units does not change the reporting units but will seriously
impact the accuracy of the flow data.
6>
Use the arrow keys to select SCMH , SMPS , SCFM , or SFPM . Press E .
FACTORY STP REF
25DEGC/101.3KPA
The factory reference settings appear. This is read only.
7>
Press E .
Important
Changing either the reference temperature or pressure affects the Standard
Temperature and Pressure (STP) settings of the original calibration. The
reference STP is based on temperature and pressure values that maintain
accurate readings during daily changes throughout a year.