Kurtz Ersa HR 600/2, Translation Of The Original Operating Manual

Page: 75 / 169

6 | Function description
The user interface
6.4.3.3 The work area [Profile library]
Profile name Board Component Automation Sensor
Adaptor
(head)
Common
settings
Profile settings Configuration Placement Image and document
Show process instructions
Bottom left
Specifications
Sensor
Adaptor (head)
Head position
PCB positioning
Board Pos. X:
Board Pos. Y:
Profile definitions
Profile name
Board
Library
Soldering
Placement
Profile library
Archive
Save target position
Actual parameters Data table System settings System info
X-Axis Y-Axis Z-Axis Angle of rotation
Profile parameters
Value Parameters
Profile
Document name
Tracking ID
Profile ID
Recording date
User
Profile printout
29.11.2014 12:47
Bottom left
Board
Profile
Component
Sensor
Automation Adaptor (head) Head position
Profile library Online-HR 600 Current image Archive Profiles
Actual parameters
Search for profiles
Show template profiles
Add
Delete
Search for duplicates
Overwrite
Reset calibration value
Activate
Profile parameters
Search term
Desoldering parameters
Component
Desoldering
Placement
Soldering
Inspection
Pin 1 orientation
Profile automation
Fig. 19: The [Profile library] work area: On the left the [Library] work area, in the centre the library selection and in the work area,
on the right, the [Profile parameters] and the [Profile table].
If the [Profile library] button is enabled in the functional area, the profile library will
appear on the left in the work area and in the display window of the [Profiles] tab
to edit profiles. Under the [Library] tab, the profile database is displayed in the
middle.
[Search for profiles] frame:
Searches for a profile. With respect to this, please read the chapter Searching for a
profile [
}
106].
– [Show template profiles]: Displays the factory-set profile templates provided.
[Profile parameters] frame:
– [Add]: Adds a factory-supplied template to your own profile table. You can
then customize the template according to your requirements and save it under
a new name. With respect to this, please read Chapter Enabling a profile tem-
plate [
} 103].
– [Delete]: Deletes a profile from your own [Profile library]. With respect to this,
please read the chapter Deleting a profile [ } 104].
– [Search for duplicates:] Searches for identical profiles.
– [Overwrite]: Changes to a profile are saved in the profile by clicking on this but-
ton.
– [Reset calibration value]: If the [Calibrate process at melting temperature]
function has been enabled in the [Soldering] work area, profile calibration will
change. The [Reset calibration value] button restores the original calibration
value. With regard to this, please read the chapter The work area [Soldering]
[
} 69].
Ersa GmbH 3BA00207_01 Operating Instructions HR 600_2 | Rev. 3 75 / 169