32
3BA00226 • 2016-11-16 • Rev. 2
Ersa HR 200
3.2
Safety instructions
DANGER! Possible device malfunctioning!
Check all components before each use. Have damaged parts only
repaired by a specialist or the manufacturer. If repairs are carried out
improperly, there is a risk of accidents. Always use original ERSA spare
parts for repairs.
WARNING! Dangerous electrical voltage!
The emergency stop button
④
does not interrupt the power supply!
Some individual parts of the HR 200 are live even if the emergency stop
button has been actuated! Do not use the emergency stop button to
disconnect the device from the mains supply. Always switch the device off
using the main switch
③.
If necessary, pull out the plug.
WARNING
!
Dangerous electrical voltage!
Do not use the connection cable to unplug the power cord and carry the
device. Protect the connection cables. Make sure that connection cables
do not come into contact with heat, oil or sharp edges. Damaged connec-
tion cables can cause fires, short circuits and electric shocks and must
therefore be replaced immediately.
WARNING
!
Dangerous electrical voltage!
Protect your device against liquid ingress and moisture. Otherwise there
is a risk of electric shock or fire.
WARNING! Fire and explosion hazard due to overheating!
Before heating up the heating tool, eliminate any flammable objects,
liquid and gases from the working area thereof. Disconnect your heating
tool from the mains after use. Never leave your hot heating tool unat
-
tended. Keep in mind, please, that even after switching off the device,
the housing of the radiant heater requires some time to cool to a safe
temperature.
For your safety
