Kurabo QuickGene-810, Operation Manual

Page: 56 / 78

1
2
6
3
4
5
7
4 Maintenance
32 QuickGene-810 Operation Manual
Rev. 1.7
4.3 Cleaning the QuickGene-810
This section explains how to clean the QuickGene-810.
The following describes the parts to clean and cleaning methods:
WARNING:
Before starting the maintenance work, turn off the power of QuickGene-
810 and disconnect the power plug from the outlet.
Otherwise, it may cause an electric shock.
Parts to clean Cleaning methods
Pressure Head Wipe with a Kimwipe® or paper tissue soaked with ethanol.
QuickGene-810 (outside) Remove the dust lightly with a dry, soft cloth.
QuickGene-810 (inside)
Wipe with a Kimwipe® or paper tissue soaked with 0.5% sodium
hypochlorite solution.
Remove the dust lightly with a dry, soft cloth.
QuickGene-810
(outside)
QuickGene-810
(inside)
Pressure Head
Carrier Rail
Note:
Do not clean the
carrier rail.