20
H5-60-85-01
For internal use only
Remove the control board box cover (fig. 30).
Replace the control board (fig. 31).
Disconnect the connector L between the control board and the
flat multiwires (fig. 32).
Disconnect the wires as indicated in fig. 32.
Replace the control board by reversing the disassembling
process.
Switch on the electricity supply to the hood.
Check the different control functions to ensure that the hood is
working peoperly.
6.10
Replacing the flat multiwires of the control panel
Remove the control panel as described on page 17.
Then remove the control board as described on page 19.
Replace the flat multiwires and instal the control board. Then instal the control panel by reversing the
disassembling process.
Switch on the electricity supply to the hood.
Check the different control functions to ensure that the control box is working correctly.
Fig. 30
Fig. 31
Fig. 32
white
brown
blue
pink
purple
black
Summary of Contents for KD 12450.0
Page 1: ... c QLMHFH c IJLMHFH ...
