16
H5-60-85-01
For internal use only
6.6
Replacing the aluminium front trim
Unscrew the 4 screws illustrated in fig. 13 and 14, item
F
, remove the switch block bracket (fig. 15) and
place it in the front strip as indicated in fig. 16.
Ensure the flat multiwires are replaced correctly.
Carefully adjust the position of the aluminium front trim to prevent any damage to the flat multiwires.
Fit the aluminium front trim with the 10 screws as indicated in fig. 4, 5 and 6, on page 12, and fig. 17.
Re-position the control box in the aperture in the aluminium front trim.
Fit the switch block as indicated on page 14.
Fig. 15
Fig. 16
Fig. 17
Summary of Contents for KD 12450.0
Page 1: ... c QLMHFH c IJLMHFH ...
