H2-50-02
13
For internal use only
4.2.4
Release of a cooking zone burner
A cooking zone burner which still does not ignite after three attempts will be blocked. When a burner is
blocked, the letter “b” will appear in the power level display.
The burner is released by pressing the minus key of the cooking zone on the front left (1) and the key
sensor (14) for at least 2 seconds. After release the burners will be reset at 0 and can then be re-ignited.
Please note:
If release is repeated 5 times in sequence in a period of 15 minutes, the controls will
show FLT06 and will not accept any request for release for another 15 minutes.
It is not possible to release a blocked burner when the key lock is activated. The key lock must first of all
be cancelled in order to release the burner.
4.2.5
Prescribed pan base diameter
Table 1:
Cooking zone burner
Power in watts
Pan diameter in cm
Wok burner
3350
24-26
Fast burner
2800
20-22
Semi-fast on the front left
1350-1400
16-18
Semi-fast on the back left
1750
16-18
Additional burner
1000
10-14
