H2-50-02
11
For internal use only
4.2.2
Setting the clock
The time of day shown by the hob's inner clock will have to be reset after a power failure.
The clock key (11) and the key sensor (14) will need to be pressed simultaneously for at least 3 seconds
to set the time of day.
The number flashing on the left of the dot shows the hours and the minutes are shown on the right. The
hours can be raised or reduced by pressing the minus (12) or plus (13) keys. When the minus (12) and
plus (13) keys are kept pressed, the hours will be changed without any interruption.
Press the clock key again to set the minutes. The numbers on the right of the dot will start to blink.
Proceed the same as described for the hours to change the minutes.
Pressing the clock key (11) will store the time of day that has been set.
