Service Manual
8
For internal use only
2.5
Setting the clock
After your microwave oven is first plugged in or after a power failure, the clock display will flash to indicate
that the time shown is not correct. To set the clock, proceed as follows:
1. Press the Clock key. The hour numbers will start to
flash.
2. Press key “-” and “+” to set the hours.
3. Press the Clock key to set the minutes. The minute
numbers will start to flash.
4. Press key “-” and “+” to set the minutes.
5. To finish, press the Clock key again.
Hiding/Displaying the Clock
If the clock display bothers you, you can hide it by pressing the Clock key for 3 seconds. The dots that
separate the hours and minutes will flash but the rest of the clock display will be hidden. If you want to
see the clock display again, press the Clock key again for 3 seconds.
2.6
Safety blocking
The oven functioning can be blocked (for example, to stop it being used by children).
1. To block the oven, press the Stop key for 3
seconds. You will hear a sound signal and the dis-
play will show the word “SAFE”. The oven is blok-
ked in this state and cannot be used.
2. To unblock the oven, press the Stop key again for 3
seconds. You will hear a sound signal and the display will show the time again.
2.7
Stopping the rotating plate
1. To stop the rotating plate, press the "+" key and the
Stop key at the same time
2. To start plate rotation again, press the "+" key and
the Stop key at the same again.