Service Manual
18
For internal use only
6.3
Closing device and door alignment
Closing device
Two essential items need to be observed to enable the closing device to function properly.
1. The position of the box for the closing device (right and
left): this box must be mounted securely in the fastening
clips and must be installed flush with the front edge of the
oven (right-hand box: spare part no. 528925, left-hand box:
spare part. no. 528926).
2. The shape of the original black box was modified so that
the box fitted better. In order to distinguish between the
boxes, the new box is now available in white under the
same spare-part number.
Please note!
Now and then the problem may occur with the
newly-designed holders too, when the appliance
has been used frequently or when it has been used
for grilling for a longer period. Expansion of the
metal cover causes it to press the switch holder out
of its position. In this case the underside of the
holder, which makes contact with the oven cover,
will need to be sandpapered or cut to shorten it by
about 2 mm.
down
front
about 2 mm