Service Manual
12
For internal use only
3.4
After the installation
• If the oven is to be installed on a permanent basis it should be installed by a qualified technician. In
such a case, the oven should be connected to a circuit with an all-pole circuit breaker with a mini-
mum separation of 3 mm between contacts.
• Only connect the appliance to sockets with a safety delay fuse of at least 16 A. Please also check to
ensure that the main fuse in your home has a minimum output of at least 16 A so that it will not
suddenly trip when the microwave oven is in operation.
WARNING!
THE OVEN MUST BE EARTHED.
• The manufacturer and retailers do not accept responsibility for any damage that may be caused to
people, animals or property if these installation instructions are not observed.
• The oven only functions when the door is closed correctly. After the first use, clean the inside of the
oven and the accessories, following the cleaning instructions given in the section “Oven cleaning and
maintenance”.
• Fit the turntable support (1) in the centre of the oven cavity and put
the turntable ring (2) and the turntable plate (3) on top, making sure
they slot in. Whenever you use the microwave, the turntable plate
and the respective accessories must be inside and correctly fitted.
The turntable plate can rotate in both directions.
