Maintenance work
10
3. Maintenance work
3.1. Changing the lamp
ATTENTION!
Before you replace the lamp, make sure that the appliance has been
disconnected from the mains.
The replacement bulb must withstand temperatures up to 300 ºC. They
can be ordered from our technical Customer Service.
3.1.1
Changing the upper bulb
□ Unscrew the glass cover of the bulb-holder.
□ Replace the bulb.
□ Reassemble the glass cover.
3.2. Dismantling/assembling the shelf runners
There are 4 rack levels available on the side racks. The rack levels are counted from the top
to the bottom from 1 to 4. The rack level 1 is the lowest one.
Dismantling
□ Open the door as far as it will go.
□ Take the accessories out of the appliance.
□ Completely loosen the nut at the front of the fastening
element (A), pull the supports forward (B) and remove them.
□ Removing the side racks.
□ Insert the rear notch into the rear fastening nut.
□ Fix the front fastening nut (C) in the front notch of the support.
□ Secure the support with the nut (D) and turn until it is fully
adjusted (E).