Kuppersberg INBOX 54, Technical Passport, Page: 25 / 48

25
ENGLISH TECHNICAL PASSPORT
Cooker hood
The saturation of the charcoal filter
occurs after more or less prolonged use,
depending on the type of cooking and
the regularity of cleaning of the grease
filter.
In any case it is necessary to re-
place the cartridge at least every four
mounths.
The charcoal filter may NOT be
washed or regenerated.
CIRCULAR CARBON FILTER
Carbon filters are used only when
the hood is not supported Keyed to the
ventilation duct. Activated carbon filters
have the ability to absorb odors until
completely absorbed. Not subject re-
generation or cleaning, should change
at least every two months.
Apply one on each side as cover to
both the shield grids of the motor im-
peller, then turn clockwise.
For the disassembly, turn counter-
clockwise.
REPLACING LAMPS
The illumination system consists of
13W LED-STRIP.
Disconnect the appliance from the
electricity.
To replace the lighting, you must
contact the service center.
Do not change the lamp yourself.
Warning! Prior to touching the light
bulbs ensure they are cooled down.
The hood is equipped with a lighting
system based on LED technology.
The LEDs guarantee an optimum
lighting, a duration up to 10 times as
long as the traditional lamps and al-
low to save 90% electrical energy. For
replacement, contact the technical ser-
vice.
Please note!
The following shall not be considered as defects of the Product
Cooker
hoods
Minor technical smells coming from a new product during the initial
operation period
Violation of the operating conditions of the components of the product,
made of natural wood
Sound of the air flow passing through the ventilation ducts and channels
of the product
Discoloration of housing elements of the product when using the product
Black discoloration and deformation of fat filter elements when using the
product