Bona Dual Edge Manual
6
Operator Safety (Cont.)
Injury to the operator or
bystanders could occur if the
machine is plugged in while
performing maintenance,
servicing, changing filter, or
inspecting. Always unplug
machine when not in use.
DO NOT use solvents or other
flammable products to clean
this machine.
Dry use only. DO NOT use for
liquid recovery, which could
result in motor failure, electric
shock, and electrocution.
Airborne sanding dust
should not be breathed in
while operating a sanding
machine. Always wear
an approved particulate
respirator while operating
sanding equipment.
Injury to the eyes and or body
can occur if protective clothing
and or equipment is not worn
while sanding. Always wear
hearing protection, and a dust
mask while sanding.
Exposure to high noise levels
can cause hearing loss or
impairment. Wear EN-ISO
approved hearing protection
(earmu s) when using this
equipment.
Bodily injury could occur
if power is supplied to the
machine with the power
switch already in the “ON”
position. Always check to
assure the power switch is
“OFF” before connecting the
machine to its power source.
DO NOT use this machine to
sand furniture. DO NOT ride
on this machine.
DO NOT put any objects into
openings. DO NOT use with
blocked openings. Keep free
from dust, lint, hair or anything
that may reduce airflow.
Storage
It is advisable to store the machine in its original packaging.
Doing so makes it possible to form a column of three
packages maximum, with one on top of the other.
This equipment is for dry use only and must not be used or
kept outside in wet conditions. Store the machine in a dry
building, otherwise the machine could be damaged. Storage
temperature from -20°C to 50°C.
