KUNTENG KT-LCD8S, User Manual

Page: 1 / 3

KT-LCD8S E-Bike Display User Manual
Dear customer, please read this manual before you use KT-LCD8S Display. The manual will guide you use the instrument
correctly to achieve a variety of vehicle control and vehicle status displays.
Functions and Display
Instruments using the structure form of instrument body portion and the operation buttons are
designed separately.
1
UP Button
9 VOL
Battery voltage
2
SW Button
10
The brake display
3
DOWN Button
11
Backlight and headlights
4
ASSIST
Pas level
12
℃
Environment temperature
6Km/H push power assist
℉
Environment fahrenheit
5 THROTTLE
Run sign
13
MOTOR W
Power display
6 Km/H
Riding speed( metric)
14
DST
Trip distance
7
AVS
Average speed
ODO
Total distance
MXS
MAX speed
15
TIM
Single trip time
8
Battery capacity indicator
TTM
Total trip time
1. Operation
1. ON/OFF
Hold button long to turn on the power, and hold long for a second time to turn off
the power. When the motor stops driving and when the e-bike is not used for a consecutive 5
minutes, it will automatically shut down and turn off the motor power supply.
2. Display 1
Hold button to start up and enter display .
2.1
Turn on backlight and headlights
Hold long to turn on backlight and headlights (the controller
should have headlight drive output function); hold long again to
turn off the backlight and headlights.
2.2
Assist ratio gear (ASSIST) switch
Press or to switch 1-5 file gear. Gear 1 is for the
minimum power, gear 5 is for the highest power. Each startup will
automatically restore the gear shutdown last time (the user can set
randomly). Gear 0 is without booster function.
2.3 6Km/H assist promotion function
Hold and flashes, the vehicle drives at the speed not more
than 6Km /h. Release button, the function is invalid.
2.4 Display and delete of single data
After power on for 5 seconds, hold and at the same
time, single trip riding time (TM) and single trip distance (DST) flash,
hold button shortly, the content of both is cleared. If failed
holding the button within 5 seconds, it will automatically return the
display interface after 5 seconds, original content is preserved.
3.Display 2
Hold button shortly in display 1 to enter display 2.