Gateway PROFINET IRT Slave
16
4.4 Installing a Gateway in the Control Cabinet
a) Hold the grid element of the gateway component against the top-hat rail.
b) Press down the locking elements towards the gateway.
c) Make sure that the gateway is firmly attached to the DIN rail.
4.5 Connecting a Gateway to the Fieldbus
To connect the gateway component to PROFINET, you need two RJ45 connectors.
The pin assignment complies with the specifications of the PNO.
Pin
Meaning
1
TX+
2
TX -
3
RX+
4
Do not connect!
5
Do not connect!
6
RX-
7
Do not connect!
8
Do not connect!
Installation
Summary of Contents for PROFINET IRT Slave
