Gateway PROFINET IRT Slave
15
4.3 Connecting Gateway Components
In order to attain a fully functional gateway, you have to interconnect both gateway components.
a) Connect an interconnect port to each gateway component using the plug-in jumper provided.
Illustration 6:
Connecting gateway components
ð
You can now install the gateway in the control cabinet.
NOTICE
Only ever interconnect two gateway components.
If you connect additional components, severe defects could result on all devices.
Installation
Summary of Contents for PROFINET IRT Slave
