Kuhnt AS55 Series, Service Manual

Page: 88 / 173

SERVICE MANUAL AS55X
86 www.kuhnt.com 55Xseries_manual_V3.22 (18-08-15)
5.8.5 Short message callback request
For more details about “short message callback request” see 1.4.

Message
Here the short message text can be entered. The text is limited to 160 characters. In
the right upper corner of this window you have a counter which shows the amount of
entered characters. This text is always the same for all short messages and can be
complemented by the right handed variables. To enter one variable press the
belonging button. To delete this variable press this button again.
Default value: not reported

DTMF Code
This code the caller can enter to send a short message manually. It can be entered
while the called party is ringing, is busy or if the call has been rejected. After entering
this code the call will be determined. You can also enter it during the first 10 seconds
of an established call if the checkbox “Enter code during connection” is checked.
If the checkbox “Send message automatically if call is unsuccessful” is not checked
you will be invite to enter this code by selected tone if the call is finished by the
called party (e.g. the called party is busy or reject the call).
If you configured “Send message automatically if call is unsuccessful” and a mailbox
answers the call, no short message will be created, because this call will be handled
as successful. Therefore also use this DTMF code.
Default value: not reported

Enter code during connection
Here you can allow to enter a DTMF code during the first ten seconds of a
connection. This is necessary, if it should be possible to send a message after a
voicemail has answered the call. If you configured “Send message automatically if call
is unsuccessful” and a mailbox answers the call, no short message will be created,
because this call will be handled as successful. Therefore also use this DTMF code.
Notice: If GME is configured as well, the GME code cannot enter during the
first ten seconds of the call.
Default value: unchecked