Kuhnt AS55 Series, Service Manual

Page: 84 / 173

SERVICE MANUAL AS55X
82 www.kuhnt.com 55Xseries_manual_V3.22 (18-08-15)

Save Call Setup only from PBX Domain
If this box is unchecked, calls will be saved only if the source of the call is in
PBX domain. Calls from the fixed network, that are forwarded (by an extension) to a
GSM phone will not be saved in this case.
Default value:
ticked

Global routing
You have the option to create an external routing for every mobile number.
Therefore you can use the individual call-setup menu below. Each of the entered
number can be forwarded to an individual group of GSM channels. Only those groups
can be selected, that are defined in the window “GSM settings“ / “GSM groups“ (see
5.9.3) before. Here you can define the default, global route. Every number which is
not listed in individual call-setup parameters will be routed as defined. If “no call-
setup“ is selected, every call-setup attempt to an unspecified number will be rejected
by the AS55X. If “Next ready GSM channel“ is selected, every call-setup attempt to an
unspecified number will be routed via the next channel, that is registered, that has
sufficient signal quality and is not in use.
Default value: Next ready GSM channel
Notice: The correspondent setting in the window “Wired access” /
“Individual call-setup” will have priority over this one.

Use individual call setup parameters
With this check box, the use of the list of individual call-setup parameters can be
enabled or disabled. If it is disabled, the global routing and the general GSM settings
will be valid for every call-setup from ISDN to GSM. If it is enabled, the entries in the
list of individual call-setup parameters have priority over the global routing and GSM
general settings.
Default value: ticked