HRB122-152-182
50
6. - Putting into service
KN135HGB_D
Power harrows
6.1.11 Uncoupling the machine
To remove the rods:
- Remove roll pins (1).
- Dislodge rods using a hammer.
- Pull firmly on rods to remove them completely.
1
- Park the machine on an even fairly level
ground.
- Lower the tractor three-point linkage to rest the
machine on the ground.
- Disconnect the PTO shaft from the tractor.
- Use chain (1) to secure PTO shaft.
- Detach the top link from the machine end.
- Uncouple lower linkage arms.
- Lower the tractor three-point linkage.
The machine is uncoupled.
1
