KUHN GF13002, Operator'S Manual

Page: 27 / 72

Putting into service
Gyrotedder
GF17002
25
2. Coupling and uncoupling
„
Description of coupling elements
The machine is equipped with:
- A 1’’3/8 - 6 spline wide angle pto shaft (1).
- 2 hydraulic hoses (2).
- A 7-pin electric plug for the electrical signalling
equipment (3).
„
Preparing the tractor
The machine adapts to tractors fitted with a pull bar or
piton-type coupling.
The tractor nominal PTO speed must be 1000 min
-1
.
The tractor must be equipped with :
- 1 double acting hydraulic outlet.
- An electric 7-pin plug for the signalling equipment.
- 1 hydraulic circuit that allows a working pressure of
180 bar (2610 psi).
The tractor pull bar or piton-type coupling is
subject to a negative load when putting the
machine into work/transport position.