FC2860TLD-3160TLD-3560TLD
114
12. - Troubleshooting guide
KN281CGB_L
Mower conditioner
12. Troubleshooting guide
Problem
Cause
Remedy
Uneven stubble.
Dull or broken knives.
- Replace knives.
Knives not installed
correctly.
- Make sure the arrow on the
knife upper face is pointing in
the disc's direction of rotation.
Excessive ground speed.
- Reduce groundspeed.
Incorrect cutting height.
- Adjust the cutting height.
Incorrect mowing unit
floatation.
- Adjust the mowing unit ground
pressure.
Tangled and down crops.
- Reduce cutting height.
- Increase the mowing unit
ground pressure.
Soil build up in front of the
cutterbar.
Too much cutterbar down
pressure.
- Adjust the mowing unit ground
pressure.
Very wet working
conditions.
- Adjust the mowing unit ground
pressure.
- Adjust the cutting height.
Obstruction of conditioning
rotor.
Insufficient rotor speed
(rotational frequency).
- Adjust the finger conditioning
rotor speed.
Too low PTO speed
(rotational frequency).
- Check PTO speed. Refer to the
decal fitted on the machine.
Swath shields too closed.
- Open swath shields.
