8. - Instructions for work
FC243RGII
49
KN041BGB A
Mower conditioner
8. Instructions for work
8.1
Putting the machine into work
position
- Lower the machine using the tractor lift linkage:
• H = 550 mm (1’10’’).
The machine is in headland turn position.
Before placing the machine in working
position:
- Check that nobody is within the machine
pivoting area.
- If there is someone, make sure the person
moves away.
From the transport position:
- Fully lift tractor lift linkage.
- Pull on cord to release latch.
- Activate the tractor double acting valve in the
working position direction:
• The machine takes up the headland turn position
If the tractor is equipped with an adjustable
hydraulic distributor, preferably use a high flow
for gradually opening of the machine without it
scraping the ground.
Summary of Contents for FC243RGII
Page 2: ......
