FC243RGII
46
6. - Putting into service
KN041BGB A
Mower conditioner
6.2.11 Uncoupling the machine
The machine is uncoupled.
For tractors not fitted with a hydraulic
position control function, unhook and attach
check chain to its support.
- Place the machine in transport position.
- Release and lower parking stand (1).
- Secure parking stand using lock (2).
- Lower the tractor three-point linkage to rest the
machine on the ground.
- Insert and lock lynch pin (3).
1
2
3
- Uncouple the PTO shaft.
- Place PTO shaft in its support (1).
- Disconnect hydraulic hoses and electric plug.
- Place hydraulic hoses and electric signalling plug
in their respective supports (2).
- Detach the top link from the machine end.
- Release the lower links.
- Lower the tractor three-point linkage.
1
2
Summary of Contents for FC243RGII
Page 2: ......
