EL162
114
10. - Maintenance and storage
KN146AGB_L
Cultiplow
10.2 Cleaning the machine
- Clean the machine thoroughly:
• The rotor.
• The inner panels.
In case of clogging, pivot scraper crossbar:
- Clean roller scraper bar.
10.2.1 Cleaning the roller scraper bar
Maxipacker roller
- Loosen bolts (3).
- Remove nut (1).
- Remove tensioner (2).
- Insert lever in sheath (4).
- Proceed the same way on the other side.
- Pivot scraper bar using lever.
- Clean roller scraper bar.
- Replace scraper bar in its initial position.
- Fit tensioner (2).
- Fit nut (1):
• Torque: 22 daNm (162 lbf ft).
- Torque bolts to (3):
• Torque: 22 daNm (162 lbf ft).
- Proceed the same way on the other side.
- Regularly clean roller and roller scraper bar.
1
3
4
3
2
Summary of Contents for EL162
Page 2: ......
