KUHN AXIS 20.1, Operator'S Manual

Page: 85 / 216

Commissioning
73
A
AXIS
20.1
AXIS
20.1
A Commissioning
A.1 Mount universal drive shaft with shear bolt coupling on the AXIS 20.1.
A.1.1 Mounting the universal drive shaft
1. Checking the attachment position.

The end of the shaft with the tractor symbol must point towards the tractor.
n
CAUTION
Danger from unsuitable drive shaft.
The solid fertiliser broadcaster is fitted with a universal drive shaft
type designed for the unit and its power output.
 Use only universal drive shafts approved by the manufacturer.
 Follow the directions in the shaft manufacturer's manual!
NOTICE
The universal drive shaft with shear bolt coupling can only be mounted on the
solid fertiliser broadcaster of the model type AXIS 20.1. In case you want to
mount a drive shaft or a Tele-Space drive shaft with radial pin coupling please
proceed as described in chapter
8. 3: Mounting the drive shaft on the solid fer-
tiliser broadcaster, page 38 .
2. Take off the protective
shield.
3. Release the locking screw
[1] of the drive shaft shield.
4. Turn the shaft shield to de-
mounting position.
5. Pull the universal drive shaft
out.
Figure 1: Remove drive shaft shield
AXIS 20.1