KUHN AXIS 20.1, Operator'S Manual

Page: 50 / 216

Standard operating procedure (all models) 8
38
AXIS-GENERAL
8. 3 Mounting the drive shaft on the solid fertiliser broadcaster
The solid fertiliser broadcaster can be delivered with various kinds of drive shafts,
depending on model:

universal drive shaft with shear bolt clutch,

universal drive shaft with radial pin clutch,

Tele-Space universal drive shaft with radial pin clutch.
8.3.1 Fitting and removing the drive shaft
Attachment:
1.
Check the attachment position.
 The end of the shaft with the tractor symbol must be at the tractor end of
the shaft.
n
CAUTION
Danger from unsuitable drive shaft .
The solid fertiliser broadcaster is fitted with a universal drive shaft
type designed for the unit and the power.
 Use only universal drive shafts approved by the manufacturer.
 Follow the directions in the shaft manufacturer's manual!
NOTICE
The drive shaft with shear pin attachment can only be mounted on the solid
fertiliser broadcaster of the type AXIS 20.1. See „Mount universal drive shaft
with shear bolt coupling on the AXIS 20.1.“ on page 73 .
2. Release the drive shaft [1]
locking screw.
3. Turn the drive shaft shield to
the demounting position.
4. Pull the universal drive shaft
out.
Figure 8.1: Remove drive shaft shield