KUHN AXIS 20.1, Operator'S Manual

Page: 44 / 216

Axle load calculation 5
32
AXIS-GENERAL
5.2 Axle loads table
If the rear-mounted unit (G
H
) is lighter than the minimum ballast at the rear (G
H min
), the weight
of the rear-mounted unit must be increased to at least the weight of the minimum rear ballast.
Calculation of the actual total weight
G
tat
Enter the calculated actual and approved total weight as specified in the tractor operator's manual
in the table.
G
tat
G
V
T
L
G
H
+ +
( )
=
Calculation of the actual rear-axle
load T
H tat
Enter the calculated actual and approved rear-axle load as specified in the tractor operator's man-
ual in the table.
T
Htat
G
tat
G
Vtat
–
( )
=
Tyre load capacity
Enter double the value (two tyres) of the approved tyre load capacity (for example, see tyre man-
ufacturer's documentation) in the table.
Actual value from
calculation Approved value
from operator's
manual Twice approved
tyre load capacity
(two tyres)
Minimum ballast
front/rear kg
⎯ ⎯
Total weight kg
≤
kg
⎯
Front-axle load kg
≤
kg
≤
kg
Rear-axle load kg
≤
kg
≤
kg
The minimum ballast weight must be mounted on the tractor as an attachment
or as ballast.
The calculated values must be less than or equal to the permitted values.