KUHN AXIS 20.1, Operator'S Manual

Page: 114 / 216

Spreading Operation B
102
AXIS-GENERAL
AXIS
20.1
B.11 Decoupling and parking the solid fertiliser broadcaster
The solid fertiliser broadcaster can be securely parked on the frame or the prop
wheels (special accessories).
Instructions for parking the solid fertiliser broadcaster:

Park the solid fertiliser broadcaster on a smooth, solid surface only.

Park the solid fertiliser broadcaster only with empty hopper.

Release the coupling points (lower and upper link) before removing the solid
fertiliser broadcaster.

Place universal drive shaft, hydraulic hoses and electrical cables on the
brackets after uncoupling (in direction of travel left front of frame).
Figure 25: Storage of hydraulic pipes

If the solid fertiliser broadcaster is uncoupled, the return springs of the single-
acting hydraulic cylinders must be de-tensioned. Proceed as follows:
n
DANGER
Danger of being crushed between tractor and the
solid fertiliser broadcaster
Persons between the tractor and solid fertiliser broadcaster
while parking and uncoupling are risking their lives.
 Make sure that no one is between the tractor and the
solid fertiliser broadcaster while actuating controls for
the three-point linkage.
Figure 24: Storage of hydraulic pipes