KUHN ALTOR 4560, Operator'S Manual

Page: 55 / 98

Instructions for work
Silo unloader - Straw Spreader
ALTOR 4560
53
$ Instructions for work
1. Belt tension
In order to guarantee optimal operation, belt tension
must be checked and adjusted if necessary every 100
hours (or more often in case of frequent feeding with
tough products).
The belt tension is adjusted using the screw rod (1) nut
(2) and check nut (3).
In the engaged position, the spring tension must be set
to L = 180 mm (0’7’’) (length of compressed spring).
Before placing the machine in working
position:
Check the immediate surroundings before
starting up the machine. Make sure that the
visibility is adequate and that there are no
obstacles in the machine working area.