INFO
When importing profile bundles into
Slic3r, existing presets may be
overwritten. It is recommended to
backup your custom/modified
presets by exporting them as a
bundle first (File > Export Config
Bundle).
Slicing the 3D model
The 3D model you want to print must be
available as an .stl-file. Most common 3D
modeling software is able to create this file
format.
Start Slic3r to process a 3D model into G-
1.
code data.
Select the preconfigured profiles for
2.
filament, print and printer before
generating a G-code file.
Open the Filament Settings tab end
enter the
measured during calibration.
Rename and save the filament
profile.
Export the G-code data.
3.
tuning any parameters for the printing
process.
Slic3r steps while crating a print job, including
setting the extrusion multiplier.
Uploading print jobs to the 3D printer
Every PC connected to your network can access
the RepRap Industrial via the Web Interface URL
(network address) that is displayed in the
screen at the GUI.
Open your internet browser and enter the
URL in the address line.
The web-interface opens with “First
