//
ORIGINAL OPERATING INSTRUCTIONS
Commissioning
25.04.2019
28/54
Hinweis
Compare current driving speed (on top right) and speedometer speed of the carrier
vehicle.
7.5
Simulation speed
The simulation speed serves for stationary spreading tests and for manual operation.
1
Start setup menu (see Chapter
7.2 "Start/finish setup menu", page 25
)
2
Actuate several times.
Example: 15 km/h
➯
4
Actuate to change set
simulation speed [5; 10; 15; 20;
30].
7.6
Checking and setting of sensors
Hinweis
Prerequisites:
•
Spreader and carrier vehicle shall be in operation
•
Make sure that hydraulic oil pressure is sufficient
Caution
Sensor too close to the sensor disc.
Danger of property damage.
•
Start measurement with sufficient safety distance with regard to the sensor disc!
1
Start setup menu (see Chapter